Solar + LED Floodlight 6000

Description

Self-sufficient, Energy-Efficient, Solar Powered, 6000 Lumen Solar Streetlight!

Solar Streetlight 6000 Lumen
The BIG brother of our “Solar + LED Floodlight 1600”, the Solar Streetlight 6000 Lumen offers the same styling and features as its brethren including: Completely self-contained (NO wiring!), Solar powered, LED illumination, Weatherproof/Waterproof, Pole & Wall mountable, and Motion Sensing.

Brilliant Illumination
With 90 LED chips producing up to 6000 lumens, our floodlight is perfect for adding light to sidewalks, driveways, out-buildings, dumpsters, parking lots, roadways, and other remote areas.

Remote Controlled 
Our light comes equipped with a remote control that allows you to easily change the lighting mode, timer settings, and brightness. 

Night & Motion Sensing
Our light has a PIR Sensor (Passive Infrared Sensor) that detects movement and automatically ramps up the brightness of the light. Additionally, there is no need to worry about turning off the light during the day, it will automatically turn itself off!

Slim Design
Everything is built in to its slim case: battery, solar panel, infrared sensor, and LEDs. Our Solar Streetlight 6000 Lumen is unobtrusive and fits neatly in smaller areas.

Easy to Use
Set-up for can be summed up in 3 steps: Mount, Turn-On, Forget about it! It truly is that easy.

Simple.
When you want a light, but do not want the headache of running electrical wiring, our Solar Streetlight offers an affordable and simple solution for your needs. The included hardware and multi-angle mount ensures light is placed where it’s needed most.

Worry-free Design
A completely self-sufficient and self-contained design, just mount it to any hard surface with the included mounts (fence, pole, wall, tree) and turn on to provide light anywhere you need it.

Go Green
Being solar powered (doesn’t use power from the grid) and utilizing long-life energy-efficient LEDs for light, its carbon footprint is minimal. The sun is already providing free energy for you, why not capture it and reduce your energy costs at the same time?!

Quick List of Features

• LED – 6000 lumens
• Remote Controlled
• Maintenance free
• No Wiring
• Solar Powered
• Weatherproof
• CE, RoHS, BSCI Certified
• Hardware Included

Lighting Area Coverage

WARNING: This product can expose you to chemicals including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Specs

• LED type: SMD2835
• LED Qty: 90
• Color Temperature: 6,000K
• LED Max Lumens (lm): 6000
• LED Standby Lumens (lm): 1400
• Solar Panel: Monocrystalline 21W
• Solar Panel Charge Time: 8-10 hours @ full sun
• Remote Control: Yes
• Night Sensor: Yes
• Motion Sensor: Yes
• Detection Angle: 120°
• PIR Sensor: 25-40 feet at 120°
• Beam Angle: 140° x 70° TPIII
• IP65 Rated Waterproof
• Certifications: CE, RoHS, BSCI
• Battery: Rechargeable LiFePO4
• Battery Specs: 12.0Ah, 9.6V 32650
• Run Time: 3+ Full Nights on a single charge
• Protections: Over-Charge and Over-Discharge
• Working Temperature: -20°C to 60°C (-4°F to 140°F)
• Composition: Polycarbonate & ABS UV coated Case
• Mounting: Wall/Pole
• Mounting Hardware: Included
• Install Height: 9-19.5 feet
• Dimensions (LxWxH): 28.0 x 11.3 x 3.0 (inches)
• Weight: 12.8 lbs.
• Warranty: 1 year

Quick Use Instructions:

Mode A: Constant Lighting Mode

• Press Constant Lighting Mode
• Press Desired Time Setting
• Press Desired Brightness Setting
• Light will flash after each button press to indicate setting has been accepted

• Press Constant Lighting Mode
• Press 2H Time Setting
• Press 80% Brightness Setting
• Light will stay on, at dark, for 2 hours at 80% brightness

Mode B: Sensor Mode:

• Press Sensor Mode
• Press Desired Brightness Setting
• Light will flash after each button press to indicate setting has been accepted

• Press Sensor Mode
• Press 60% Brightness Setting
• Light will turn on at 60% brightness when motion is detected, then drops to 30% of 60% brightness after 20 seconds of no motion detected.

*Note:  The "Switch Confirm" button is not needed nor does it have a function in programming. The setting confirmation is when the light itself flashes.

Videos