This item has been discontinued. Please click here for a suitable replacement item.
Self-sufficient, Energy-Efficient, Solar Powered, Remote Controlled 1000 Lumen Area Light!
1K Solar LED Flood Light RC Bursting out of the shadows and blinding the competition, Wagan Tech has continued to lead the Solar Lighting market with innovation and impressive results. Introducing the Remote Controlled 1000 Lumen Solar LED Flood Light V2; a compact, bright, waterproof, and completely self-contained Solar Lighting Solution!
Worry-Free Design A completely self-sufficient and self-contained design, just mount it to any hard surface (fence, pole, wall, tree) and turn on to provide light anywhere you need it. Solar powered and waterproof (IP65 rated), once you can set it up, you can forget about it.
Remote Controlled One of the most innovative features of the 1K Solar LED Flood Light RC is the remote control. Able to turn the light on/off, switch between high/low modes, and set the timer, the remote control allows you to adjust the settings without leaving the comfort of the indoors or having to climb a ladder!
Features Providing 1,000 lumens of bright light are the 30 Epistar LEDs mounted beneath a glass lens. Optimized for excellent light dispersion, the reflector provides a broad spread of light to illuminate wide areas. The battery is capable of providing 3 full nights (36 hours) of light on a single charge. The case is made out of tough polycarbonate that is waterproof and built to withstand the elements. With a simple mounting bracket, the light is able to be mounted at the optimal angle of your choosing.
Go Green Being solar powered (doesn’t use power from the grid) and utilizing long-life energy-efficient LEDs for light, its carbon footprint is minimal. The sun is already providing free energy for you, why not capture it and reduce your energy costs at the same time?! Easily provide light to remote areas without wiring or having to pay the power company.
Comparing Solar LED Floodlights If you're in the market for a solar LED area or floodlight, look no further than the Wagan Tech 1000 Lumen Solar Area Light! It's completely self contained, waterproof, bright, and needs no wiring! With the included remote control, it is easy to optimize its features to suit your needs. There really is no comparing our light to theirs...our light wins hands-down every time!
How it Works The 1K Solar LED Flood Light RC has multiple selectable modes of operation; this will cover the default M1 Mode. In the M1 Mode, the light will be constantly on at 150 lumens until motion is detected; at which point it will illuminate the full 1,000 lumens. 30 seconds after motion ceases, the light will rollback to the 150 lumen setting until motion is detected again or dawn. During daylight hours, the light automatically turns off and recharges it's battery. Once night falls, the light automatically turns on and resumes the previous night's settings.
Quick List of Features
30 Epistar LEDs
1,000 Lumens
Remote Controlled
Solar Powered
IP65 Rated Waterproof
Multiple Mounting Options
Compact and Portable
NO Wiring
Angle Adjustable
WARNING: This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
LED: Epistar
LED Qty: 30
Color Temperature: 6,000K
LED Max Lumen (lm): 1,000
Solar Panel: Monocrystalline 6.5W
Solar Panel Charge Time: 10 hours @ full sun
Remote Control: Included
Remote Control Batteries: 2x AAA
Remote Distance: 40 feet
Night Sensor: Yes (< 10lux)
Motion Sensor: Yes
PIR Sensor: 16-26 feet (5-8m) 120°
IP65 Rated Waterproof
Certifications: CE, RoHS, FCC, BV
Battery: Rechargeable Lithium
Battery Specs: 3.7V - 12Ah (12,000 mAh)
Run Time: 3 Full Nights (M1 mode) on a single charge
Protections: Over-Charge and Over-Discharge
Working Temperature: -25°C to 65°C (-13°F to 149°F)
Composition: Aluminum Alloy/ABS Case
Mounting: Wall/Pole (Not Included)
Install Height: 8-11 feet (2.5 - 3.5m)
Dimensions (LxWxH): 18 x 9.7 x 3.4 (inches)
Weight: 6.5 lbs.
Warranty: 1 year
Quick Use Instructions:
Initial Activation required to turn on light - Press button near LEDs
Default setting is always M1 mode:
150lm when no motion detected
1000lm when motion is detected
Using the remote control, you can set the brightness and timer:
First select brightness (%), then select timer setting (T)
Brightness settings are: 10%, 30%, 60%, or 100%
Timer duration is 1hr to 4hrs (remote in "OFF" position), 5hrs to 8hrs (remote in "ON" position): set by pressing the T1-T4 buttons
Example: for 100% brightness for 2 hours, press the 100% button and then the "T2" button
The remote can also be used to turn the light off manually.
WARNING: This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.